We're the company that's here you on the internet and in person. Please feel free to call us toll-free, 88. Brought to you by your source for quality replacement parts and the best service on the internet. ![]() You don't have to over tighten them though. Fast forward here again as we start those bolts in and tighten them up using a 10mm socket and ratchet and extension and tighten them up nice and firm. Kind of pull it forward to the front of the car and push it down and lock it back in. You'll see it kind of twisting out and putting it in place. Then just put the inside of the light in first then put it in place, make sure the wiring goes in, make sure your tabs goes underneath here. Put this in there, plug in the lead and make sure that's clipped on correctly. Okay, and there's two tabs that go into slots down here. Pull the plastic off the edges here and off the bottom. Makes great replacement if you had a broken one or if yours have gotten foggy. Get your finger down in, twist it counterclockwise, it comes up and out. Do the same thing with this one right down in here. This one also, just turn it counterclockwise and pull it out, there's the bulb, pull it straight out. Okay, to remove your bulb, you'll grab on here, disconnect that, take this whole ring, pull it off and the bulbs comes out. Disconnect that and your whole assembly will come out. Okay, there's a connector right here, pull back on the tab. Speed it up here as I just remove those two 10mm bolts. You'll probably get in here with a wrench as well. ![]() Use your 10mm socket and ratchet and extension. Getting Started - Prepare for the headlight bulb change Learn More > 2. Actually what you want to do is remove this 10mm bolt and this 10mm bolt. Chevrolet Cobalt Model Years - 2005, 2006, 2007, 2008, 2009, 2010 1. Okay, with the service light bulb, it's a little tight to get your hand under there. The only tool you'll need is a 10mm wrench or a socket and ratchet and extension. We're going to show you how to remove and replace the whole assembly and you do have to remove it to service the old bulb. In this video, we're going to show you how to service the headlight on this 2005 Chevy Cobalt, same as any 2005 to 2010 Cobalt. Next time you need parts for your vehicle, think of. Remember not to touch the bulb itself with your hands, as it will cause a hot spot that burns the bulb out faster than usual.Brought to you by, your source for quality replacement parts and the best service on the internet. It is not difficult to replace the headlight bulb on a 2005-2010 Chevy Cobalt but call a knowledgeable friend or professional if in doubt.Ĭlimates age cars differently, which can affect bolts being rusted or other possible problems.Ī vehicle that was in an accident may also have some type of unforeseen problem. Install the headlight assembly back into place.Push the electrical plug on to the new bulb.Insert the retainer and turn it clockwise to lock the bulb in place.Remove the headlight bulb from the retainer turning counterclockwise.Remove the eclectic plug from the bulb assembly. ![]() ![]() (The one on the right is the headlight bulb)
0 Comments
Leave a Reply. |